diff --git a/Functions/Circuits/Circuits/New-NetboxCircuit.ps1 b/Functions/Circuits/Circuits/New-NetboxCircuit.ps1
new file mode 100644
index 0000000..aac3447
--- /dev/null
+++ b/Functions/Circuits/Circuits/New-NetboxCircuit.ps1
@@ -0,0 +1,67 @@
+<#	
+	.NOTES
+	===========================================================================
+	 Created with: 	SAPIEN Technologies, Inc., PowerShell Studio 2020 v5.7.181
+	 Created on:   	2020-11-04 11:48
+	 Created by:   	Claussen
+	 Organization: 	NEOnet
+	 Filename:     	New-NetboxCircuit.ps1
+	===========================================================================
+	.DESCRIPTION
+		A description of the file.
+#>
+
+
+
+function New-NetboxCircuit {
+    [CmdletBinding(ConfirmImpact = 'Low',
+                   SupportsShouldProcess = $true)]
+    [OutputType([pscustomobject])]
+    param
+    (
+        [Parameter(Mandatory = $true,
+                   ValueFromPipelineByPropertyName = $true)]
+        [string]$CID,
+        
+        [Parameter(Mandatory = $true)]
+        [uint32]$Provider,
+        
+        [Parameter(Mandatory = $true)]
+        [uint32]$Type,
+        
+        #[ValidateSet('Active', 'Planned', 'Provisioning', 'Offline', 'Deprovisioning', 'Decommissioned ')]
+        [uint16]$Status = 'Active',
+        
+        [string]$Description,
+        
+        [uint32]$Tenant,
+        
+        [string]$Termination_A,
+        
+        [datetime]$Install_Date,
+        
+        [string]$Termination_Z,
+        
+        [ValidateRange(0, 2147483647)]
+        [uint32]$Commit_Rate,
+        
+        [string]$Comments,
+        
+        [hashtable]$Custom_Fields,
+        
+        [switch]$Force,
+        
+        [switch]$Raw
+    )
+    
+    $Segments = [System.Collections.ArrayList]::new(@('circuits', 'circuits'))
+    $Method = 'POST'
+    
+    $URIComponents = BuildURIComponents -URISegments $Segments -ParametersDictionary $PSBoundParameters
+    
+    $URI = BuildNewURI -Segments $URIComponents.Segments
+    
+    if ($Force -or $PSCmdlet.ShouldProcess($CID, 'Create new circuit')) {
+        InvokeNetboxRequest -URI $URI -Method $Method -Body $URIComponents.Parameters -Raw:$Raw
+    }
+}
\ No newline at end of file
diff --git a/Functions/Circuits/Providers/Get-NetboxCircuitProvider.ps1 b/Functions/Circuits/Providers/Get-NetboxCircuitProvider.ps1
new file mode 100644
index 0000000..07ad3ca
--- /dev/null
+++ b/Functions/Circuits/Providers/Get-NetboxCircuitProvider.ps1
@@ -0,0 +1,72 @@
+<#	
+	.NOTES
+	===========================================================================
+	 Created with: 	SAPIEN Technologies, Inc., PowerShell Studio 2020 v5.7.181
+	 Created on:   	2020-11-04 12:06
+	 Created by:   	Claussen
+	 Organization: 	NEOnet
+	 Filename:     	Get-NetboxCircuitProvider.ps1
+	===========================================================================
+	.DESCRIPTION
+		A description of the file.
+#>
+
+
+
+function Get-NetboxCircuitProvider {
+    [CmdletBinding(DefaultParameterSetName = 'Query')]
+    param
+    (
+        [Parameter(ParameterSetName = 'ById',
+                   Mandatory = $true)]
+        [uint16[]]$Id,
+        
+        [Parameter(ParameterSetName = 'Query',
+                   Mandatory = $false)]
+        [string]$Name,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [string]$Query,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [string]$Slug,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [string]$ASN,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [string]$Account,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [uint16]$Limit,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [uint16]$Offset,
+        
+        [switch]$Raw
+    )
+    
+    switch ($PSCmdlet.ParameterSetName) {
+        'ById' {
+            foreach ($i in $ID) {
+                $Segments = [System.Collections.ArrayList]::new(@('circuits', 'providers', $i))
+                
+                $URIComponents = BuildURIComponents -URISegments $Segments.Clone() -ParametersDictionary $PSBoundParameters -SkipParameterByName "Id"
+                
+                $URI = BuildNewURI -Segments $URIComponents.Segments -Parameters $URIComponents.Parameters
+                
+                InvokeNetboxRequest -URI $URI -Raw:$Raw
+            }
+        }
+        
+        default {
+            $Segments = [System.Collections.ArrayList]::new(@('circuits', 'providers'))
+            
+            $URIComponents = BuildURIComponents -URISegments $Segments.Clone() -ParametersDictionary $PSBoundParameters
+            
+            $URI = BuildNewURI -Segments $URIComponents.Segments -Parameters $URIComponents.Parameters
+            
+            InvokeNetboxRequest -URI $URI -Raw:$Raw
+        }
+    }
+}
\ No newline at end of file
diff --git a/Functions/Circuits/Terminations/Get-NetboxCircuitTermination.ps1 b/Functions/Circuits/Terminations/Get-NetboxCircuitTermination.ps1
new file mode 100644
index 0000000..6e055fd
--- /dev/null
+++ b/Functions/Circuits/Terminations/Get-NetboxCircuitTermination.ps1
@@ -0,0 +1,79 @@
+<#	
+	.NOTES
+	===========================================================================
+	 Created with: 	SAPIEN Technologies, Inc., PowerShell Studio 2020 v5.7.181
+	 Created on:   	2020-11-04 10:22
+	 Created by:   	Claussen
+	 Organization: 	NEOnet
+	 Filename:     	Get-NetboxCircuitTermination.ps1
+	===========================================================================
+	.DESCRIPTION
+		A description of the file.
+#>
+
+
+
+function Get-NetboxCircuitTermination {
+    [CmdletBinding(DefaultParameterSetName = 'Query')]
+    param
+    (
+        [Parameter(ParameterSetName = 'ById',
+                   ValueFromPipelineByPropertyName = $true)]
+        [uint32[]]$Id,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [string]$Circuit_ID,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [string]$Term_Side,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [uint32]$Port_Speed,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [string]$Query,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [string]$Site_ID,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [string]$Site,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [string]$XConnect_ID,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [uint16]$Limit,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [uint16]$Offset,
+        
+        [switch]$Raw
+    )
+    
+    process {
+        switch ($PSCmdlet.ParameterSetName) {
+            'ById' {
+                foreach ($i in $ID) {
+                    $Segments = [System.Collections.ArrayList]::new(@('circuits', 'circuit-terminations', $i))
+                    
+                    $URIComponents = BuildURIComponents -URISegments $Segments.Clone() -ParametersDictionary $PSBoundParameters -SkipParameterByName "Id"
+                    
+                    $URI = BuildNewURI -Segments $URIComponents.Segments -Parameters $URIComponents.Parameters
+                    
+                    InvokeNetboxRequest -URI $URI -Raw:$Raw
+                }
+            }
+            
+            default {
+                $Segments = [System.Collections.ArrayList]::new(@('circuits', 'circuit-terminations'))
+                
+                $URIComponents = BuildURIComponents -URISegments $Segments.Clone() -ParametersDictionary $PSBoundParameters
+                
+                $URI = BuildNewURI -Segments $URIComponents.Segments -Parameters $URIComponents.Parameters
+                
+                InvokeNetboxRequest -URI $URI -Raw:$Raw
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/Functions/Circuits/Types/Get-NetboxCircuitType.ps1 b/Functions/Circuits/Types/Get-NetboxCircuitType.ps1
new file mode 100644
index 0000000..bce6ad5
--- /dev/null
+++ b/Functions/Circuits/Types/Get-NetboxCircuitType.ps1
@@ -0,0 +1,64 @@
+<#	
+	.NOTES
+	===========================================================================
+	 Created with: 	SAPIEN Technologies, Inc., PowerShell Studio 2020 v5.7.181
+	 Created on:   	2020-11-04 12:34
+	 Created by:   	Claussen
+	 Organization: 	NEOnet
+	 Filename:     	Get-NetboxCircuitType.ps1
+	===========================================================================
+	.DESCRIPTION
+		A description of the file.
+#>
+
+
+
+function Get-NetboxCircuitType {
+    [CmdletBinding(DefaultParameterSetName = 'Query')]
+    param
+    (
+        [Parameter(ParameterSetName = 'ById')]
+        [uint16[]]$Id,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [string]$Name,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [string]$Slug,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [string]$Query,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [uint16]$Limit,
+        
+        [Parameter(ParameterSetName = 'Query')]
+        [uint16]$Offset,
+        
+        [switch]$Raw
+    )
+    
+    switch ($PSCmdlet.ParameterSetName) {
+        'ById' {
+            foreach ($i in $ID) {
+                $Segments = [System.Collections.ArrayList]::new(@('circuits', 'circuit_types', $i))
+                
+                $URIComponents = BuildURIComponents -URISegments $Segments.Clone() -ParametersDictionary $PSBoundParameters -SkipParameterByName "Id"
+                
+                $URI = BuildNewURI -Segments $URIComponents.Segments -Parameters $URIComponents.Parameters
+                
+                InvokeNetboxRequest -URI $URI -Raw:$Raw
+            }
+        }
+        
+        default {
+            $Segments = [System.Collections.ArrayList]::new(@('circuits', 'circuit-types'))
+            
+            $URIComponents = BuildURIComponents -URISegments $Segments.Clone() -ParametersDictionary $PSBoundParameters
+            
+            $URI = BuildNewURI -Segments $URIComponents.Segments -Parameters $URIComponents.Parameters
+            
+            InvokeNetboxRequest -URI $URI -Raw:$Raw
+        }
+    }
+}
\ No newline at end of file